24/7 emergency roofing for commercial & industrial buildings24/7 commercial roof emergency service
Case study · Westbridge Market Building

A New Roof for the Westbridge Market Building

Recurring leaks above second-floor offices put a downtown property at a turning point. First Class Roofing developed a replacement plan around an aging roof, an active bakery, and a narrow service court.

Location
Westbridge town center
North-central Ohio
Property
Three-story brick market building
Trigger
Recurring leaks and failed flashing
Project focus
Standing-seam metal roof replacement
Site conditions
Narrow rear court; 38-ft. roof access
A roof with a local story

Building stewardship happens one decision at a time.

The Westbridge Market Building housed a ground-floor bakery, two professional offices, and storage space above. Its owner had upgraded the storefront and interior in stages, but recurring water stains in an upstairs corridor made the roof the next priority.

Temporary repairs had kept isolated leaks under control. During the next inspection, cracked shingles, deteriorated wall flashing, and softened decking near a rear valley showed that another round of patching would leave the underlying problems unresolved.

That is a familiar reality for owners of older commercial properties: the right plan has to protect the building today while respecting operating needs, capital timing, and the long-term vision for the property.

The owner’s priority: resolve recurring leaks while keeping the businesses below open.
1928

Built as a neighborhood grocery with storage on the upper floors.

1986

Upper floors converted to offices, with the street-level retail space retained.

Today

A bakery and local businesses keep the property active throughout the week.

William of First Class Roofing on a commercial roof
A working downtown propertyThree floors. Multiple tenants. One coordinated roofing plan.
The challenge

Four conditions had to be considered together.

Older commercial roofs rarely present a one-variable problem. The existing system, building structure, water entry, site access, and the owner’s broader property plan all affect the right roofing recommendation.

Aging roof system

The 24-year-old shingle roof showed widespread cracking and wear across its 7,200-square-foot surface.

Leaks beyond the surface

Water staining and softened decking near a rear valley pointed to problems that surface repairs alone could not resolve.

Mixed roof conditions

Different roof slopes, an older masonry wall, and previous repairs required careful detailing at transitions and penetrations.

Downtown access

The roof sat 38 feet above a narrow rear service court shared with bakery deliveries. Material handling had to fit around that daily activity.

The technical approach

The important question was not only “metal or shingles?”

The team selected a standing-seam metal system after reviewing the roof slopes, building use, and owner’s maintenance priorities. Because the existing roof concealed areas of deteriorated decking, the plan called for removing the shingles rather than covering them.

Once the old covering was removed, the crew replaced damaged deck sections and rebuilt the rear valley detail. The new assembly combined suitable underlayment, manufacturer-specified panel attachment, and new flashing at the masonry wall and roof penetrations.

  • Review the deck, framing, and existing layers before specifying attachment.
  • Create intentional separation when the selected assembly calls for it.
  • Fasten into reliable structural material.
  • Account for panel movement, moisture, ventilation, and warranty requirements.
Roof assembly overviewFrom weathering surface to structure
Standing-seam metal panelsWeathering surface with thermal movement
Panel attachment systemSecured to the verified substrate
Compatible underlaymentInstalled beneath the new metal system
Repaired deck and supporting structureAttachment must engage suitable, verified material

Every roof is different. Final design depends on inspection findings, structural conditions, moisture strategy, applicable codes, and the selected manufacturer’s published requirements.

Commercial rooftop and surrounding downtown buildings
Working around an active propertyAn early delivery window and a protected rear access route kept the work coordinated with the bakery’s daily schedule.
Project logistics

A good roof plan includes everything required to reach the roof safely.

Commercial roofing is not only installation. It is also access, staging, safety, communication, and protecting the activity around the building.

  1. Confirm roof and structural conditionsReview the existing system and the attachment path before installation.
  2. Stage materials by craneSchedule roof material lifts before the bakery’s morning delivery window.
  3. Coordinate the service courtKeep pedestrians clear of lifting operations and reopen the delivery route after each scheduled lift.
  4. Keep daily operations movingWork in manageable sections, protect exposed areas, and give tenants a daily update on access and noise.
The result

A renewed roof. A building ready for its next chapter.

Installation was completed over nine working days. The bakery and offices remained open, with short, scheduled restrictions at the rear service court. At the follow-up visit after the first sustained rainfall, the previously affected corridor showed no new water staining.

#1

Hidden damage addressed.

Removing the old shingles exposed damaged decking so it could be replaced before the new system went down.

#2

Trouble spots rebuilt.

New valley and wall flashing details addressed the locations associated with recurring leaks.

#3

A coordinated roof system.

Panels, underlayment, attachment, and flashing were planned together around the building’s conditions.

#4

Businesses kept operating.

Scheduled lifts and daily communication helped tenants work around the installation without closing.

The First Class Roofing difference

Full-service roofing support for commercial and industrial buildings.

From an active leak to long-range replacement planning, First Class Roofing helps property owners understand conditions, compare practical options, and move forward with quality products and exceptional workmanship.

25+Years of relevant roofing experience
24/7Emergency commercial roofing service
40+Five-star reviews on Google
★★★★★
MultiCertified with multiple manufacturers

One company. Multiple paths forward.

Inspection, repair, restoration, coating, and replacement capabilities help the team recommend around the roof’s actual condition.

Commercial & industrial services
Residential expertise
Roof inspections
Leak detection & repair
Roof installation
Roof coatings
Roof restoration
Roof replacement
Single-ply systems
Metal roofing systems
Low-slope roofing
Flat roofing
Trusted manufacturers & associations

Supported by strong industry relationships.

First Class Roofing works with respected roofing manufacturers and participates in organizations that support quality, training, business accountability, and the local community.

Owens Corning
Conklin Roofing Systems
Versico Roofing Systems
American WeatherStar
CertainTeed
Richland Area Chamber and Economic Development
Choice Roof Contractor Group
Top Roof Contractors
Your next step

Need a second set of eyes on a commercial roof?

Schedule an inspection for planning and documentation or call anytime when an active leak cannot wait.